Infineon Produces First Functional 300mm Silicon Carbide Power Wafers in Villach
Infineon processed functional 300mm silicon carbide power devices in Villach using existing silicon fab tools, yielding 2.3 times more chips per wafer.
By Jin, Founder & Startups
3 min read
Infineon Technologies has fabricated functional power devices on 300-millimetre (12-inch) silicon carbide (SiC) wafers at its volume manufacturing plant in Villach, Austria, marking the first production-line demonstration of 300mm SiC power chips.
The German chipmaker unveiled the processed 300mm SiC wafer at the electronica 2026 trade show in Munich, which opened on 10 November.
Why 300mm silicon carbide matters
Silicon carbide handles higher voltages, temperatures, and switching frequencies than conventional silicon, making it essential for electric-vehicle traction inverters, solar and wind grid converters, and high-voltage power delivery racks inside AI data centres.
Until now, volume SiC manufacturing has topped out at 150mm and 200mm wafers because SiC crystals are harder and more brittle than silicon boules. By stepping up to 300mm diameter wafers, Infineon gains roughly 2.3 times the usable die area per wafer compared with 200mm lines, lowering unit chip costs once yields mature.
Reusing existing silicon fab tools and Cold Split
Rather than ordering bespoke wafer-handling lines from scratch, Infineon adapted existing 300mm silicon fabrication tools at Villach to process the wide-bandgap wafers. With this run, Infineon now processes all three primary power semiconductor substrates, silicon (Si), gallium nitride (GaN), and silicon carbide (SiC), on 300mm wafers.
In parallel, Infineon demonstrated its Cold Split wafering process on 300mm SiC boules at its Dresden, Germany facility. Traditional wire sawing turns a large share of expensive SiC crystal into kerf dust; Cold Split uses laser conditioning and controlled mechanical cleavage to slice thinner wafers with far less material loss.
Commercial timeline for EVs and AI data centres
Infineon cautioned that while technical feasibility in a production fab is now proven, full commercial volume production will be scheduled alongside anchor customers in automotive powertrains, industrial energy systems, and hyperscale AI data centres.
Frequently Asked Questions
How many more chips does a 300mm SiC wafer yield than 200mm?
Moving from 200mm to 300mm wafers increases surface area enough to yield roughly 2.3 times more power semiconductor chips per wafer.
Where did Infineon manufacture the 300mm SiC wafers?
Infineon processed the functional power devices at its Villach, Austria fab and demonstrated 300mm Cold Split wafer slicing at its Dresden, Germany site.
Subscribe to the TechWhoKnows newsletter for semiconductor manufacturing, foundry capacity, and hardware engineering coverage.
Sources
- 1Infineon Technologies Press Releasesinfineon.com
- 2Compound Semiconductor 300mm SiC Reportcompoundsemiconductor.net
- 3DIGITIMES Semiconductor Packaging and Wafer Coveragedigitimes.com